An unreleased OnePlus phone carrying the model number PYP110 has passed China's 3C certification. The listing shows the phone supports 100W wired charging. Weibo tipster Digital Chat Station says the device is likely the OnePlus Turbo 7 Pro. If so, that's a step up from the 80W charging on this year's Turbo 6, a phone built around battery life and gaming.
OnePlus has not confirmed the phone's name, specs, price or launch date as of November 18, 2026. The certificate is dated November 17, according to Notebookcheck, which first linked the listing to the tipster's claims.
What the certification shows

China's 3C listings rarely give away much about a phone itself, but they do name the chargers it ships with. This one lists two power adapters, model numbers VCBAOBCH and VCBAJDCH.
On 200-240V mains, both adapters put out up to 11V at 9.1A, which works out to 100W. That points to 100W as the phone's top wired charging speed in China.
On 100-130V mains, the voltage used in the US and Japan, output drops. The VCBAOBCH adapter falls to about 80W and the VCBAJDCH to about 55W. Other OnePlus phones show the same limit. That matters for US buyers, because Turbo phones are sold in China and usually reach the US only through importers. An imported Turbo 7 Pro would charge more slowly here than the headline number suggests.
The listing doesn't give the battery capacity.
What else has leaked about the Turbo 7 Pro

Most of what we know about the hardware comes from Digital Chat Station, who has posted details about the phone over the past several weeks. None of it is confirmed, so treat the following as leaks:
- Battery: more than 9,000mAh. Earlier reports said an engineering sample used a 10,000mAh cell, but the final capacity isn't known.
- Display: a 6.78-inch flat 1.5K panel with a 185Hz peak refresh rate and 165Hz system-wide. That matches the OnePlus 16 flagship.
- Chipset: a Snapdragon 8 series chip. Reports point to Qualcomm's unannounced 3nm SM8845 Pro, which is expected to launch as the Snapdragon 8 Gen 5 Pro.
- Camera: a 200MP main camera with a large sensor, likely Samsung's 1/1.55-inch ISOCELL HP5.
- Accessory: earlier leaks also mentioned support for a cooling fan accessory, in line with the phone's gaming focus.
The SM8845 Pro naming suggests an upgraded version of the Snapdragon 8 Gen 5, which is already on the market. Qualcomm hasn't announced the chip, so its specs and performance gains are unknown.
How it compares with the OnePlus Turbo 6

The OnePlus Turbo 6 launched in China in January 2026 with a 9,000mAh battery, 80W charging, a 6.78-inch 1.5K AMOLED display at 165Hz, and Qualcomm's Snapdragon 8s Gen 4. It started at ¥2,299 in China and used a 50MP main camera.
If the leaks are right, the Turbo 7 Pro improves almost every one of those specs. It would get faster charging, a quicker screen, a newer Snapdragon 8 series chip in place of an “s” model, and a much higher-resolution main camera. Battery capacity would stay around 9,000mAh or go higher.
The move to 100W would also match the OnePlus Ace 7 series, which pairs 9,000mAh batteries with 100W SuperVOOC charging. The Turbo line now looks set to split into a standard model and a Pro, much like other OnePlus ranges in China.
Most phones sold in the US still charge at well under 100W. Even the reduced 80W from the VCBAOBCH adapter on US mains would be quick by local standards, if the phone is bought through an importer.
When to expect the Turbo 7 Pro

Phones usually pass 3C certification shortly before launch. The OnePlus Turbo 7 Pro is expected to arrive in December alongside a standard OnePlus Turbo 7, though OnePlus hasn't set a date.
Expect the phone to launch in China first, like the Turbo 6. OnePlus hasn't said whether the Turbo 7 series will be sold in other markets. Before launch, look for more certification listings that could confirm the battery capacity, and for official teasers that would settle which Snapdragon chip it uses.