SPL & Compatibility questions on my G1

[Pookeysi]

Hey ya'll. Im Kyler. First post EVER.

Is there any way to see which SPL and PPL I am running? I had an adventure with my phone when I found out JF stopped. I tried to go from JF to CyanogenMod? - 4.1.11.1 This at the time was not a common problem on the forums so I decided to wing it. I now know that I had no need to go back to RC29 in order to change to Cyan4.1.1.

Long story short... I think at this point there is a conflict with my SPL and PPL. (I dont know if PPL is the official term for Primary program loader or not). Or a conflict with my Modversion (4.1.11.1) and Firmware (1.6) Or my ect. ect.

Is there a resource that you know of that will allow me to view the compatibility of overall phone stuff? I dont want to email Cyan at the moment because I think he has enough on his plate right now....

It is on and running now. Earlier today my phone died and when I powered back on I got the G1 Original SPL tri color screen with the Serial0 line across the middle. Every now and then when I refresh it it would flash to a white screen and you could see for a SECOND "No image file" and it would revert back to the tri color screen with serial0 on it.

Okay. Battery out Home+Back takes me to my Cyanogen-recovery and I start wiping and Installing Any Zip on SD. Nothing was getting my phone off of SPL. Eventually I pressed my Camera+Power+Back after hooking it up via USB to my PC. It turned on and loaded Cyan amazing ROM. I was flabbergasted and I do not think that would ever work again.

I am not turning my phone off untill I think this through. Lol. I am not sure if It will load correctly or (I am 75% sure it will) go back to the SPL screen from Hades.

I know Cyan is redoing everything ATM. I love the ROM and want to stick with it untill he dishes out barebone 4.1whatever. Maybe I should run Hero with HardSPL? I think I read Hero is not optimized for G1. I am a noob with a vocabulary so I apologize if my post is confusing, but I am so confused.

Here is all of the info that I know about my phone: Model#: Tmobile G1 Firmware Version: 1.6 Baseband Version: 62.50s.2017u_2.22.19.261 Kernel Version: 2.6.29.6-CM41 Modversion: CyanogenMod?-4.1.11.1 Build #: DRC63 cm-recovery-1.4 And apparently I have the HBOOT-0.95.0000
I assume because I am NOT running original software that my phone is still root from when I switched to JF a couple months ago. However I went to the Terminal emulator, typed in su enter and got the #. Which means my phone has Root (I think)

Please help. I have been working at this for about a week now and I really need a experts opinion. Thank you!!!!!!

[supremeteam256]

Originally Posted by Pookeysi

Hey ya'll. Im Kyler. First post EVER.

Is there any way to see which SPL and PPL I am running? I had an adventure with my phone when I found out JF stopped. I tried to go from JF to CyanogenMod? - 4.1.11.1 This at the time was not a common problem on the forums so I decided to wing it. I now know that I had no need to go back to RC29 in order to change to Cyan4.1.1.

Long story short... I think at this point there is a conflict with my SPL and PPL. (I dont know if PPL is the official term for Primary program loader or not). Or a conflict with my Modversion (4.1.11.1) and Firmware (1.6) Or my ect. ect.

Is there a resource that you know of that will allow me to view the compatibility of overall phone stuff? I dont want to email Cyan at the moment because I think he has enough on his plate right now....

It is on and running now. Earlier today my phone died and when I powered back on I got the G1 Original SPL tri color screen with the Serial0 line across the middle. Every now and then when I refresh it it would flash to a white screen and you could see for a SECOND "No image file" and it would revert back to the tri color screen with serial0 on it.

Okay. Battery out Home+Back takes me to my Cyanogen-recovery and I start wiping and Installing Any Zip on SD. Nothing was getting my phone off of SPL. Eventually I pressed my Camera+Power+Back after hooking it up via USB to my PC. It turned on and loaded Cyan amazing ROM. I was flabbergasted and I do not think that would ever work again.

I am not turning my phone off untill I think this through. Lol. I am not sure if It will load correctly or (I am 75% sure it will) go back to the SPL screen from Hades.

I know Cyan is redoing everything ATM. I love the ROM and want to stick with it untill he dishes out barebone 4.1whatever. Maybe I should run Hero with HardSPL? I think I read Hero is not optimized for G1. I am a noob with a vocabulary so I apologize if my post is confusing, but I am so confused.

Here is all of the info that I know about my phone: Model#: Tmobile G1 Firmware Version: 1.6 Baseband Version: 62.50s.2017u_2.22.19.261 Kernel Version: 2.6.29.6-CM41 Modversion: CyanogenMod?-4.1.11.1 Build #: DRC63 cm-recovery-1.4 And apparently I have the HBOOT-0.95.0000
I assume because I am NOT running original software that my phone is still root from when I switched to JF a couple months ago. However I went to the Terminal emulator, typed in su enter and got the #. Which means my phone has Root (I think)

Please help. I have been working at this for about a week now and I really need a experts opinion. Thank you!!!!!!

You have the original SPL installed on your phone thats your (HBOOT -0.95.000) you can at least load the hardspl and you can do that by flashing it through terminal instead of a .zip. And unless you are talking about running the half built crappy micro hero build then you have to install the danger spl which by the sound of it (don't mean no offense by it) I wouldn't try to install it cause you might end up with a brick and you need to do more reading. And to answer your initial question you check what spl you have by going in bootloader mode (camera + power)